Morse Tutor Kits

Inventory status:

October 29 – units in stock ready to ship. Kits ship in 2-3 business days and fully assembled in 3-5 business days.

Ordering instructions and pricing are at the bottom of this page.

Details:

For a limited time, VE6LK and VE6TD are offering a kitting service for the W8BH Morse Tutor, ESP32 version. This is also known as a CW trainer and is an alternative to the Morserino-32 however with a much larger screen. You can see all of the details and build instructions on W8BH’s website. You can see a full demo of the kit in action on Kyle AA0Z’s New CW Operator’s Roundtable on YouTube.

As a finished device, it is capable to test your receiving skills with letters, words, numbers, callsigns or mixed content. It is also capable to challenge your sending skills with various on-screen games. With a companion unit you can send head to head. All of the details are here in the user manual.

Why would you buy from us? We source the parts, pretest the major components, pretest the major components, kit them together and mail them out to you. Note, no case or enclosure is provided but you can print one yourself with Dann’s 3D print files. Vince keeps his tutor in a small plastic case that would normally hold a sandwich at lunch time .. each to their own when it comes to enclosures 🙂

You’ll receive all of the parts to build a functional W8BH ESP32 Morse Tutor, consisting of the following parts:

  • 3.2″ display module
  • ESP32 module
  • Buck Converter board (power)
  • PAM8403 Audio board
  • 1/8″ stereo jacks (2)
  • PCB Mount speaker
  • Rotary Encoder
  • 10K Log taper potentiometer
  • SPST power slide switch
  • Shorting jumper block
  • 0.1″ female headers
  • 0.1″ male header pins
  • 10k and 20k resistor
  • Knobs for controls (2)
  • Circuit board

We provide a programmed and pre-tested ESP32 module with the current firmware version (so that you don’t have to learn how to do this), and we verify the functionality of each screen, each speaker and buck converter. Note that no case or mounting hardware is provided.

Build difficulty is at a NOVICE level for this project. If you own a basic pencil soldering iron, solder and basic hand tools, this project may take you up to 2 hours. Experienced builders will complete this in under 1 hour.

This offer is a kitting service only and no warranty is expressed or implied.

Customize with your own callsign

Menus make it easy to use

Easy to solder the headers and install the ESP32 and display
Fully speed adjustable

 

All prices on this page are in Canadian Dollars. We accept payment via PayPal or cash for local pickup.

Pricing:

Kit prices are $80 CAD per unit for any quantity.

If you do not own a soldering iron or do not wish to build it out yourself, add $25 and we’ll build it and test it for you.

Shipping per unassembled kit is $22 in Canada and $27 to Continental USA and for assembled kits is $26 in Canada and $31 to Continental USA. We use Canada Post for shipping. In the event that Canada Post isn’t available to use, we will provide a custom shipping quote to you. We’ll provide a shipping quote for multiple kits or to areas outside of Canada and the Continental USA including International customers.

Ordering:

If you want one kit and are within Canada or the Continental USA, please use the drop-down to select your choice. If you are outside of Canada and the Continental USA or want more than one unit, jump to the instructions below the buttons. Once you have submitted your order and whichever option you choose, check your email including your spam folder for an order confirmation email and, if outside of Canada, an email confirmation from Canada Post once the unit is ready to ship.

Please read this paragraph fully before you proceed to hit the submit button below. Double-check that you have selected the correct option in the drop-down list, and if we are in a waiting list position, there is only one choice. Should you require a refund due to an error in your selection, and as PayPal does not refund back to us their portion of fees, we will deduct those fees ($5-7) from your refund should this occur. Please – select carefully to avoid this.

 

If you are outside of Canada and the Continental USA or want more than one unit, send an email to vince [at] vincedeon [dot] com with the following 5 questions fully answered:

  • Full name
  • Call sign (if you have one)
  • Mailing address with postal/zip code
  • Phone number (needed for shipping)
  • Quantity of kits, and specify built or unbuilt

If you are outside of Canada or the USA, or wish to order multiple kits, we will prepare a quote for you including choice(s) for shipping. Once we confirm your order, we will send you a PayPal invoice with your final total. Note that PayPal may add some form of tax depending on where you are located – we are not collecting nor charging tax as these are private sales.

Shipping:

Once we receive payment, we ship kits within 3 business days and assembled units within 5. We use Canada Post for all of our shipping. You’ll receive an email link either from us or Canada Post once your unit is ready to ship. Please allow 1-2 weeks in Canada, 2-3 weeks in the Continental USA. Keep an eye on your spam folder in case the emails land there.